H-SILICONE Alb

Assembly adhesive suitable to standard glazing and sealing.

Usage:

• window glazing
• glazing of greenhouses
• sealing partition wall
• sealing window and door frames

Characterictics:

One-component, flexible sealant H-silicone in white colour gives highly durable and flexible joints resistant to water, oils, acids and alkalis. It has very good adhesion to most materials and surfaces common in the construction industry: glass, tile, terracotta, ceramics, and secured metals. The joint is durable, completely resistant to changing weather conditions and UV radiation.

Packaging and storage:

Store in original packaging in a dry and cool place for a period of 18 months from the production date at temperatures from 5 up to 35 °C.

Protect from freezing temperatures! Keep out of the reach of children!

Application:

The surface, which is to be applied silicone, should be clean and free of dust, dirt, oil, grease, rust and other substances that impair adhesion. Silicone does not require a primer, but on the specific surfaces there may be a need to use a primer.

Prior to silicone application the rim should be secured with masking tape. Cut the tip of the cartridge, leaving part of the thread. Screw the applicator at the thread, cut at an angle adjusted to the width of the joint. Apply with a manual or pneumatic gun. Silicone can be smoothed with a spatula for silicone spreading that is dampened in a solution of soap.

Use tools from plastic or stainless steel.

Silicone is cured by reaction with moisture from the air, therefore, the seal should be performed under conditions that allow access of air. Washing of cured sealant with commercially available cleaning agents prolongs the lifespan. After use, wipe the tools with a paper towel and clean with solvent.